Flue Gas Analyser

The Modern Digital Flue Gas Analyser

As expected with new technology at the time of its release, there are usually technical problems. The digital flue gas analyser was not an exception to this rule but today’s equipment is far cheaper and is made to last longer than its predecessors ten years ago. However, when compared with the problems associated with using [...]

The Modern Digital Flue Gas Analyser is from Flue Gas Analyser

Flue Gases and the Serviceable Flue Gas Analyser

Flue gases are individual gases that are emitted to the atmosphere through specially manufactured metal, concrete, plastic or clay pipes or ducts, called a flue, which are specifically designed to allow the gases to safely pass from heating appliances such as a boilers, fireplaces, stoves, ovens and furnaces etc. The specific content of flue gases [...]

Flue Gases and the Serviceable Flue Gas Analyser is from Flue Gas Analyser

Gas Engineers Will Require CPA1 From 1st April 2012

Flue gas analysers are essential for heating professionals to use when working with heating appliances. From April 2012, gas engineers who do not hold the CPA1 will have their CEN1 and/or HTR1 suspended. During the past 10 years, gas analysers have become a vital part of every heating professionals’ tool kit. Today’s electronic instruments are [...]

Gas Engineers Will Require CPA1 From 1st April 2012 is from Flue Gas Analyser

Smoke Test before using a Flue Gas Analyser

Before commissioning or servicing an oil-fired heating appliance, it is important to perform a smoke test by taking a sample of the flue gases from the boiler flue before using an electronic flue gas analyser. Failing to carry out such a test may result in temporary or permanent damage to the flue gas analyser’s internal [...]

Smoke Test before using a Flue Gas Analyser is from Flue Gas Analyser

CPA1 Combustion Performance Analysis of Domestic Appliances

Within the UK are the approximately 120,000 registered gas service engineers and some 45,000 use a flue gas analyser. Despite 75,000 gas service engineers holding competency in HTR1 (gas fires) and CEN1 (central heating boilers), they do not possess an assessed competence in the operation of flue gas analysers. It will shortly become a requirement [...]

CPA1 Combustion Performance Analysis of Domestic Appliances is from Flue Gas Analyser

Critical Factors to Consider Before Using a Flue Gas Analyser

All heating professionals are much as the part of the process of combustion analysis – from setting up the digital flue gas analyser, using it and interpreting combustion results for safety and maximum efficiency of a heating appliance. However, heating professionals must always consider other critical factors affecting the analysis equipment regardless of whether or [...]

Critical Factors to Consider Before Using a Flue Gas Analyser is from Flue Gas Analyser

Safety Issues Concerning Flues In Hidden Voids

Recently, the Gas Safe Register and Health and Safety Executive have raised serious safety concerns in respect of the use of heating appliance flues located in internal voids within buildings. A working party cross-government group has been created to deal with these safety concerns and registered social landlords have been consulted and requested to help [...]

Safety Issues Concerning Flues In Hidden Voids is from Flue Gas Analyser

Plumbers And Charity Call For Mandatory Use Of Flue Gas Analysers

CO-Gas Safety, the carbon monoxide charity, has teamed up with a London based plumbing business to call for the compulsory use of flue gas analysers by heating professionals when inspecting gas-heating appliances. It is widely understood that to complete a gas safety inspection, it would not be possible to do so without the use of [...]

Plumbers And Charity Call For Mandatory Use Of Flue Gas Analysers is from Flue Gas Analyser

New Partnership To Help Reduce Carbon Monoxide Incidents

In 2011, the Gas Safety Trust will include incident reports concerning carbon monoxide that pertain to oil and solid fuel heating installations in addition to the reporting of natural and liquid petroleum gas heating installations incidents. The reports were be compiled using information provided by HETAS, the official body of solid fuel domestic heating appliances, [...]

New Partnership To Help Reduce Carbon Monoxide Incidents is from Flue Gas Analyser

New Anton Telegan Flue Gas Analyser Kit Meets Requirements

Telegan have introduced the new Sprint V2 Kit 3, which is fully compliant with Part L1 Building Regulations, EN50379, IGE/11/UP/1b, Benchmark Commissioning Checklist, BS7927 and BS7967. With its straightforward operation, this flue gas analyser kit will simplify a heating professional’s daily workload and comes with a 5-year warranty when serviced annually. The Sprint V2 Kit [...]

New Anton Telegan Flue Gas Analyser Kit Meets Requirements is from Flue Gas Analyser